HP DesignJet T1600 User Guide - Page 19
Sleep mode, Change the language of the front-panel display, Change system options
View all HP DesignJet T1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Sleep mode Sleep mode puts the printer into a reduced power state after a period of inactivity, turning off some elements to save energy. Printer features can be enabled from this mode, and the printer maintains network connectivity, waking up only as necessary. The printer can be woken from sleep mode any of the following ways: ● By pressing the power button ● By opening a door ● By sending a print job The printer wakes up in several seconds, more quickly than if it is completely turned off. While in sleep mode, the power button blinks. To change the time that elapses before sleep mode, see Change system options on page 11. Printer Monitoring (with the Print Spooler) and Remote Printer Management with the HP Utility and Web JetAdmin continue to be available during sleep mode. Some remote management tasks offer the option of remotely waking up the printer if needed to perform the task. Change the language of the front-panel display If you can understand the current front-panel display language, tap , then System > Language. The language selection menu should now appear on the front-panel display. Tap your preferred language. The available languages are English, Portuguese, Spanish, Catalan, French, Dutch, Italian, German, Polish, Russian, Simplified Chinese, Traditional Chinese, Korean, and Japanese. Change system options You can change various printer system options from the front panel. Tap , then System. ● Language. ● Display brightness to change the brightness of the front-panel display. ● Date and time options to view or set the printer's date and time. ● Unit selection to change the units of measurement in the front-panel display. Select English or Metric. By default, units are set to Metric. ● Speaker volume to change the volume of the printer's loudspeaker. Select Off, Low, or High. ● Power options > Printer sleep to change the length of time the printer waits before going into sleep mode (see Sleep mode on page 11). You can set the time from 5 to 60 minutes. The default time is Auto-off due to inactivity to turn off the printer automatically after 120 minutes of inactivity. ● Restore factory settings to restore the printer settings to their original values as set in the factory. This option restores all of the printer settings except the administrator password and the paper presets. ● Firmware update to configure the automatic firmware update. ENWW Front panel 11