HP DesignJet T795 Introductory Information - Page 5
change the IPv4 configuration.
View all HP DesignJet T795 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
English Message or code 61:01 62, 63, 64, 65, 67 63:01 71.04 74:04 74.1 74.8:04 79:03 79:04 81:01, 86:01 94, 94.1 Recommendation The file format is wrong and the printer cannot process the job. Check the graphic language setting of your printer. If you are sending PostScript from Mac OS over a USB connection, select ASCII encoding in both the driver and the application. Check for the latest firmware and driver releases. Update your printer's firmware. The printer has failed to get an IP address. Connect to another network or change the IPv4 configuration. Out of memory. To avoid this, in the HP-GL/2 and HP RTL driver select the Advanced tab and then Send job as a bitmap. The firmware upgrade has failed. Press OK and try again. Try the firmware update again. Do not try to use your computer while the update is in progress. The firmware upgrade has failed. Your firmware file may be incorrect; try to download it again. Restart the printer. Update your printer's firmware. Please follow the instructions on the front panel. You may be asked to run a test procedure and write down a numeric code before contacting HP Support. Restart color calibration. Introductory Information 5