HP DesignJet Z2600 Introductory Information - Page 5

Front-panel error messages If you see an error message that does not appear here, and you feel in doubt about the correct response, or if the recommended action does not seem to solve the problem, contact your support representative. English Message or code Recommendation [Color] cartridge has altered [Color] cartridge has expired [Color] cartridge is low on ink [Color] cartridge is missing [Color] cartridge is out of ink [Color] cartridge is very low on ink [Color] printhead is missing Cutter replacement advised Job queue notification Maintenance #1 advised Maintenance #2 advised Paper loaded incorrectly: remove paper Paper mispositioned: remove paper Paper path error: incorrectly loaded Paper path error: misaligned Printhead replacement incomplete. Restart it. Printheads need individual testing. Do replacement. Remove [color] printhead Replace [color] cartridge Replace [color] printhead Reseat [color] cartridge Reseat [color] printhead 01.0, 01.1, 01.2 08:04 08:08 21, 21.1, 22.0, 22.1, 22.2, 22.3, 24 Check the cartridge. Replace the cartridge. Ensure that you have a new cartridge of the same color ready. Insert a cartridge of the correct color. Replace the cartridge. Ensure that you have a new cartridge of the same color ready. Insert the correct printhead. Contact your support representative to replace the cutter. Cancel, resume, or delete the job. Contact your support representative. Contact your support representative. Remove the paper and try to reload it. Remove the paper and try to reload it. Remove the paper and try to reload it. Remove the paper and try to reload it. Restart the printhead replacement process. Test the printheads using the Image Diagnostics Print, and replace any that are not working correctly. Remove the incorrect printhead and insert a new printhead of the correct type (color and number). Remove the cartridge and insert a new cartridge of the correct type (color and number). Remove the printhead and insert a new printhead of the correct type (color and number). Remove and reinsert the same cartridge. Remove and reinsert the same printhead, or try cleaning the electrical connections. If necessary, insert a new printhead. Restart the printer. Restart the printer. If the problem persists, update the printer's firmware. Retry the operation that you were attempting. If it fails again, restart the printer. If the problem persists, update the printer's firmware. Restart the printer. 4 Introductory Information