HP Designjet 2500/3500cp HP DesignJet 2000/2500 - User's Guide - Page 155
To Change the Palette Settings, Palette A.
View all HP Designjet 2500/3500cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Controlling the Overall appearance of a Print Changing Pen Widths and Colors Using the Internal Palettes HP-GL/2 SETTINGS Define palette Full menu mode Defaults: Palette: Factory Width: 0.35 mm Color: See Palette Print To Change the Palette Settings You cannot change the Factory palette, but you can define Palettes A and B to be whatever you choose. Item Palettes Pens Widths (mm) Available Options Factory, A, B. 0 through 15. 0.13, 0.18, 0.25, 0.35, 0.50, 0.65, 0.70, 0.80, 0.90, 1.00, 1.40, 2.00, 3.00, 5.00, 8.00, 12.00. Note that 0.13 mm is a one-pixel line width at 300 dpi and three-pixels line width at 600 dpi: some colors are rendered as a dot pattern. Colors 0 through 255. As specified on the Palette Print. NOTE:These settings have no effect on PostScript files. The following steps explain how to define Palette A. 1 In the front-panel menu, go to the Define Palette selection and choose Palette A. 2 Scroll to the pen number you want to change and press Enter. 3 The current width assigned to this pen is displayed, for example Width=0.35mm. If you want to change it: a Press Enter. b Scroll to the width you want c Then press Enter again. Otherwise, scroll to Color. 4 The current color assigned to the pen is displayed, for example Color=110. If you want to change it: a Press Enter. b Scroll to the color you want. c Then press Enter again. 5 When both width and color are correct, press Previous. 6-7