HP Designjet 2800/3800cp Service Manual - Page 65
System Error, Problem Description, Corrective Action, Incompatible Carriage PCA and Line Sensor
View all HP Designjet 2800/3800cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
System Error: 060300 Problem Description: Incompatible Firmware and Line Sensor. Corrective Action: Upgrade the Firmware. System Error: 060400 Problem Description: Incompatible Carriage PCA and Line Sensor OR Line Sensor not calibrated after replacing Carriage Assembly. Corrective Action: Try the following: D Calibrate the Line Sensor ' page 5-10. D Replace the Carriage Assembly ' page 8-42. System Error: 060500 Problem Description: Line Sensor not calibrated. Corrective Action: Calibrate the Line Sensor ' page 5-10. System Error: 07xxxx XXXXXXXX Problem Description: Firmware Error. Corrective action: Make sure you have the latest version of the Flash SIMM (firmware) installed or upgrade the firmware revision of the Flash SIMM ' page 1-3. If the error code remains after installing the latest Flash SIMM then report the error to the HP Response Center or the nearest HP Support Office, stating the following information: D Model and Serial Number of the printer. D the complete error number (07xxxx XXXXXXXX). D service print (Utilities / Service Tests). D plot file where the error has occurred. D additional comments about the usage, the setting, etc.. 2-30 HP DesignJet CP Series Printers System Error Codes