HP Deskjet 340 HP Infrared Adapter for HP DeskJet 340 Printer - (English and o - Page 7
Control Panel, Ports, A:\JETEYE\INSTALL.EXE, ENTER, A:\JETEYE\INSTALDOS.EXE, config.sys, win.ini, - drivers
View all HP Deskjet 340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Note: • If you are installing the JetEye® Infrared Driver for HP OmniBook 300, 425, 430, 530, 600, 600C, or 600CT, select COM3 as the infrared port, IRQ10 as the interrupt request level, and 3E8 as the I/O address. (COM2 is the default port for PCMCIA). • If you are installing the JetEye® Infrared Driver for HP OmniBook 4000 or 5000, select COM2 as the infrared port, IRQ3 as the interrupt request level, and 2E8 as the I/O address. 2. Double-click on the Control Panel icon. Then doubleclick on the Ports icon. Select the physical IR COM (the COM port which you found in Step 1), Click on Settings... then Advanced...Check for the following advanced settings; you will need these values when you install the JetEye® Infrared Driver: • I/O Port Address • IRQ 3. Insert the JetEye® Infrared Driver diskette into the floppy disk drive of your PC/notebook. In Windows, select Run from the File menu in the Windows Program Manager. English Type A:\JETEYE\INSTALL.EXE in the Command Line box. Press ENTER and follow the instructions that appear in the subsequent dialog boxes. In DOS, type A:\JETEYE\INSTALDOS.EXE to start the installation. Follow the instructions that appear. 4. When prompted that your config.sys and win.ini files will be modified, click on OK to proceed. 5. A dialog box with Infrared Port Selections will appear. Select the COM port value assigned to the infrared port which you found in step 1. 6. Click on the Advanced button. Select the IRQ setting that you found in step 2. Click on OK. 7. Select the value found in step 2 for the I/O port address. Click on OK. 8. Set the HP DeskJet 340 Printer Properties. In the Main menu, double-click on the Control Panel icon. Double-click on the Printers icon. Select HP DeskJet 340 Printer as the default printer. Click on Connect. Select the port which your IR port is assigned to by double-clicking it. 9. Reboot your PC/notebook. You are now ready to print! • 5 •