HP Dv6 1280us HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide - Page 101
the processor and contact, the graphics subsystem
UPC - 884962256534
View all HP Dv6 1280us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
CAUTION: Loosen the screws in the order indicated by the callouts to ensure consistent pressure over the processor board. 4. Loosen the three Phillips PM2.5×5.0 captive screws (5), (6), and (7) that secure the fan/heat sink assembly to the system board. CAUTION: Loosen the screws in the order indicated by the callouts to ensure consistent pressure over the processor board. 5. Remove the fan/heat sink assembly (8). NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly. NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system board each time the fan/heat sink assembly is removed. Thermal paste is applied to the fan/heat sink assembly to correspond with components on the system board as follows: capacitors and their contacts (1) the processor and contact (2), the graphics subsystem chip and contact (3), and capacitors and their contacts (4), (5) and (6). Replacement thermal material is included with all fan/heat sink assembly, system board, and processor spare part kits. NOTE: Steps 1 through 5 apply only to models with discrete subsystem memory on the system board. Steps 6 through 10 apply only to models with UMA subsystem memory on the system board. Component replacement procedures 93