HP Dv6 1280us HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide - Page 61
Memory module, Lift the rear edge
UPC - 884962256534
View all HP Dv6 1280us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Memory module Description 4 GB memory module (DDR2, 800-MHz, PC2-6400, 1-DIMM) 2 GB memory module (DDR2, 800-MHz, PC2-6400, 1-DIMM) 1 GB memory module (DDR2, 800-MHz, PC2-6400, 1-DIMM) Spare part number 509409-002 509410-002 509411-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). Remove the memory module: 1. Position the computer with the front toward you. 2. Loosen the three Phillips PM2.5×5.5 captive screws (1) that secure the memory module compartment cover to the computer. 3. Lift the rear edge (2) of the cover, swing it up and to the front, and remove the cover (3). The memory module compartment cover is included in the Plastics Kit, spare part number 511890-001. 4. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) Component replacement procedures 53