HP Dv6 1280us HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide - Page 94
Power connector cable, computer on, and then shut it down through the operating system.
UPC - 884962256534
View all HP Dv6 1280us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
d. Display assembly (see Display assembly on page 68). e. Top cover (see Top cover on page 80). Remove the USB board: 1. Disconnect the USB board cable (1) from the LIF connector on the system board. 2. Remove the Phillips PM2.5×7.0 screw (2) that secures the USB board to the base enclosure. 3. Remove the USB board (3) from the base enclosure. Reverse this procedure to install the USB board. Power connector cable Description Power connector cable Spare part number 533465-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the following components: a. Hard drive (see Hard drive on page 57). b. Optical drive (see Optical drive on page 51). c. Switch cover and keyboard (see Switch cover and keyboard on page 63). 86 Chapter 4 Removal and replacement procedures