HP Dv7-3085dx HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide - Page 89
Lift up on the right side of the system board until it is at approximately a 45-degree angle
![]() |
View all HP Dv7-3085dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
2. Disconnect the hard drive connector cables from the system board. 3. Remove the two Phillips PM2.5×5.0 screws (1) that secure the system board to the base enclosure. 4. Lift up on the right side of the system board until it is at approximately a 45-degree angle (2), and then lift the system board to the right and up and out of the base enclosure (3). Component replacement procedures 81
![](/manual_guide/products/hewlettpackard-dv73060us-hp-pavilion-dv7-entertainment-pc-maintenance-service-guide-4359862/89.png)
2.
Disconnect the hard drive connector cables from the system board.
3.
Remove the two Phillips PM2.5×5.0 screws
(1)
that secure the system board to the base enclosure.
4.
Lift up on the right side of the system board until it is at approximately a 45-degree angle
(2)
, and
then lift the system board to the right and up and out of the base enclosure
(3)
.
Component replacement procedures
81