HP ENVY 14t-1100 HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 57
Remove the two Phillips PM2.0×3.0 screws that secure the WLAN module to the system board.
![]() |
View all HP ENVY 14t-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
4. Disconnect the WLAN antenna cables from the terminals on the WLAN module. NOTE: The 1/black WLAN antenna cable is connected to the WLAN module 1/Main terminal. The 2/gray WLAN antenna cable is connected to the WLAN module 2/Aux terminal. 5. Remove the two Phillips PM2.0×3.0 screws that secure the WLAN module to the system board. (The WLAN module tilts up.) Component replacement procedures 49
![](/manual_guide/products/hewlettpackard-envy-141000xx-hp-envy-14-notebook-pc-maintenance-service-guide-d27be1e/57.png)
4.
Disconnect the WLAN antenna cables from the terminals on the WLAN module.
NOTE:
The 1/black WLAN antenna cable is connected to the WLAN module 1/Main terminal.
The 2/gray WLAN antenna cable is connected to the WLAN module 2/Aux terminal.
5.
Remove the two Phillips PM2.0×3.0 screws that secure the WLAN module to the system board.
(The WLAN module tilts up.)
Component replacement procedures
49