HP ENVY 14t-1100 HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 71
SIM/WWAN board
View all HP ENVY 14t-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Remove the Bluetooth module: 1. Disconnect the Bluetooth module cable (1) from the SIM/WWAN board. 2. Release the Bluetooth module cable from the routing clips (2) built into the base enclosure. 3. Release the Bluetooth module (3) from the retention clip built into the base enclosure. 4. Remove the Bluetooth module and cable. Reverse this procedure to install the Bluetooth module and cable. SIM/WWAN board Description SIM/WWAN board (includes cable) Spare part number 608382-001 Before removing the SIM/WWAN board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery cover and battery (see Battery on page 39), and then remove the following components: a. SIM (see SIM on page 41) b. Hard drive (see Mass storage device on page 41) Component replacement procedures 63