HP ENVY 14t-1100 HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 79
until it rests at an angle., Lift the left side of the system board
![]() |
View all HP ENVY 14t-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
6. Release the power extension cord (4) from the system board. (The power extension cord is attached to the system board with double-sided tape.) 7. Remove the five Phillips PM2.5×5.0 screws that secure the system board to the base enclosure. 8. Lift the left side of the system board (1) until it rests at an angle. Component replacement procedures 71
![](/manual_guide/products/hewlettpackard-envy-141000xx-hp-envy-14-notebook-pc-maintenance-service-guide-d27be1e/79.png)
6.
Release the power extension cord
(4)
from the system board. (The power extension cord is
attached to the system board with double-sided tape.)
7.
Remove the five Phillips PM2.5×5.0 screws that secure the system board to the base enclosure.
8.
Lift the left side of the system board
(1)
until it rests at an angle.
Component replacement procedures
71