HP ENVY 14t-1200 HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 75
Power connector cable
View all HP ENVY 14t-1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
9. If it is necessary to replace the optical drive connector board: a. Remove the Philllips PM2.0×3.0 screw (1) that secures the connector board to the optical drive. b. Remove the connector board (2). Reverse this procedure to install the optical drive cable. Power connector cable Description Power connector cable Spare part number 608380-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery cover and battery (see Battery on page 39). 5. Remove the memory module/wireless module compartment cover (see WLAN module on page 47). 6. Remove the top cover (see Top cover on page 56). Component replacement procedures 67