HP ENVY 15-ah000 Maintenance and Service Guide - Page 50
Heat sink, Remove the heat sink
View all HP ENVY 15-ah000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Heat sink NOTE: The heat sink spare part kit includes replacement thermal material. Description Heat sink Spare part number 813015-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery. Remove the heat sink: 1. Following the 1 through 4 sequence stamped into the heat sink, remove the four Phillips PM2.0×3.0 screws (1) that secure the heat sink to the system board. 42 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts