HP ENVY 15-ah000 Maintenance and Service Guide - Page 60
Card reader board, Remove the speakers see
View all HP ENVY 15-ah000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Card reader board Description Card reader board Card reader board cable Spare part number 813019-001 812680-001 Before removing the card reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Remove the battery (see Battery on page 44). 6. Remove the hard drive (see Hard drive on page 46). 7. Remove the speakers (see Speakers (front) on page 48). Remove the card reader board: 1. Remove the two broadhead Phillips PM2.0×3.0 screws (1) that secure the card reader board to the computer. 2. Remove the card reader board (2). Reverse this procedure to install the card reader board. 52 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts