HP ENVY 15-bq100 Maintenance and Service Guide - Page 48
ClickPad, Remove the four Phillips PM2.0×3.4
View all HP ENVY 15-bq100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
ClickPad NOTE: The ClickPad spare part kit does not include the ClickPad bracket or ClickPad cable. The ClickPad bracket is available using spare part number 924352-001. The ClickPad cable is available using spare part number 924351-001. Description For use only on computer models with model numbers 15m-bq1xx and 15-bq1xx For use only on computer models with model numbers 15m-bq0xx and 15-bq0xx Spare part number L00657-001 924341-001 Before removing the ClickPad, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 29). 5. Remove the battery (see Battery on page 31). Remove the ClickPad: 1. Release the ZIF connector (1) to which ClickPad cable is connected, and then disconnect the ClickPad cable from the system board. 2. Detach the ClickPad cable (2) from the keyboard/top cover. (The ClickPad cable is attached to the keyboard/top cover with double-sided adhesive.) 3. Remove the four Phillips PM2.0×3.4 (3) that secure the ClickPad bracket to the keyboard/top cover. 4. Remove the ClickPad bracket (4). 5. Remove the three Phillips PM2.0×2.2 broad head screws (5) that secure the ClickPad to the keyboard/ top cover. 40 Chapter 5 Removal and replacement procedures