HP ENVY 15-bq100 Maintenance and Service Guide - Page 56
Memory card reader board, Remove the system board see
View all HP ENVY 15-bq100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Memory card reader board NOTE: The memory card reader board includes the memory card reader slot. The memory card reader board spare part kit does not include the memory card reader board cable. The memory card reader board cable is available using spare part number 924325-001. Description For use only on computer models with model numbers 15m-bq1xx and 15-bq1xx For use only on computer models with model numbers 15m-bq0xx and 15-bq0xx Spare part number L01917-001 924336-001 Before removing the memory card reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 29). 5. Remove the battery (see Battery on page 31). 6. Remove the system board (see System board on page 42). Remove the memory card reader board: 1. Remove the two Phillips PM2.0×3.3 screws (1) that secure the memory card reader board to the keyboard/top cover. 2. Remove the memory card reader board (2). Reverse this procedure to install the memory card reader board. 48 Chapter 5 Removal and replacement procedures