HP ENVY 15-bq100 Maintenance and Service Guide - Page 53
Fan/heat sink assembly, Remove the fan/heat sink assembly
View all HP ENVY 15-bq100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Fan/heat sink assembly NOTE: The fan/heat sink assembly spare part kit includes the fan cable and replacement thermal material. Description For use only on computer models equipped with an AMD Ryzen5 processor For use only on computer models equipped with an AMD FX, A12, or A9 processor Spare part number L00161-001 924328-001 Before removing the fan/heat sink assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 29). 5. Remove the battery (see Battery on page 31). 6. Remove the system board (see System board on page 42). Remove the fan/heat sink assembly: 1. Disconnect the fan cable (1) from the system board. 2. Loosen the four Phillips PM2.0×6.2 captive screws (2) that secure the fan/heat sink assembly to the system board. Component replacement procedures 45