HP ENVY 15-j185nr HP ENVY 15 Notebook PC and HP ENVY TouchSmart 15 Notebook PC - Page 53
mSATA SSD, Remove the Phillips PM2.0×2.5 screw
View all HP ENVY 15-j185nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
mSATA SSD NOTE: This section applies only to computer models equipped with an Intel processor. Description 24 GB Spare part number 720564-001 Before removing the mSATA SSD, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the service door (see Service door on page 42). Remove the mSATA SSD: 1. Identify the mSATA SSD (1). 2. Remove the Phillips PM2.0×2.5 screw (1) that secures the mSATA SSD to the system board. (The drive tilts up.) Component replacement procedures 43