HP ENVY 15-j185nr HP ENVY 15 Notebook PC and HP ENVY TouchSmart 15 Notebook PC - Page 73
Fan, Hard drive see
View all HP ENVY 15-j185nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
b. Detach the wireless antenna transceivers (2) from the display enclosure. (The wireless antenna transceivers are attached to the display enclosure with double-sided adhesive.) Fan c. Remove the wireless antenna. The wireless antenna are available using spare part number 720532-001. Reverse this procedure to reassemble and install the display assembly. Description Fan (includes cable) Spare part number 720235-001 Before removing the fan, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 41), and then remove the following components: a. Service door (see Service door on page 42) b. mSATA SSD (see mSATA SSD on page 43) c. Hard drive (see Hard drive on page 46) d. Base enclosure (see Base enclosure on page 53) e. Display assembly (see Display assembly on page 55) Remove the fan: 1. Disconnect the fan cable (1) from the system board. 2. Remove the two Phillips PM2.5×4.5 screws (2) that secure the fan to the top cover. Component replacement procedures 63