HP ENVY 17-3077nr HP ENVY 17 - Maintenance and Service Guide - Page 51
Remove the optical drive, Reverse this procedure to install the optical drive.
View all HP ENVY 17-3077nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Remove the optical drive: 1. Release the zero insertion force (ZIF) connector (1) to which the optical drive connector cable is connected, and then disconnect the cable (2) from the connector. 2. Remove the four Phillips PM2.5×3.7 screws (1) that secure the optical drive to the computer. 3. Remove the optical drive (2). Reverse this procedure to install the optical drive. ENWW Component replacement procedures 43
Remove the optical drive:
1.
Release the zero insertion force (ZIF) connector
(1)
to which the optical drive connector cable is
connected, and then disconnect the cable
(2)
from the connector.
2.
Remove the four Phillips PM2.5×3.7 screws
(1)
that secure the optical drive to the computer.
3.
Remove the optical drive
(2)
.
Reverse this procedure to install the optical drive.
ENWW
Component replacement procedures
43