HP ENVY 17-3077nr HP ENVY 17 - Maintenance and Service Guide - Page 59
Hard drive, Disconnect the hard drive cable
View all HP ENVY 17-3077nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, cables, or screws. These components are included in the Hard Drive Hardware Kit, spare part number 665909-001. Description 1-TB, 5400-rpm, 12.7-mm 750-GB, 7200-rpm, 9.5-mm 750-GB, 7200-rpm, 9.5-mm hybrid 500-GB, 7200-rpm, 9.5-mm 320-GB, 7200-rpm, 9.5-mm Spare part number 638974-001 633252-001 684506-001 634925-001 641672-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the battery cable from the system board (see Battery on page 39). Remove the hard drive: 1. Disconnect the hard drive cable (1) from the system board. 2. Release the hard drive shield (2). 3. Remove the four Phillips PM2.5×3.7 screws (3) that secure the hard drive to the computer. ENWW Component replacement procedures 51