HP ENVY 17t-2000 HP ENVY 17 (model numbers 2000 through 2099) - Maintenance an - Page 50
Memory module, included in the Plastics Kit, spare part number 603795-001.
View all HP ENVY 17t-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Memory module Description 4-GB (PC3, 10600, 1333-MHz) 2-GB (PC3, 10600, 1333-MHz) Spare part number 621568-001 598856-001 Before removing a memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the hard drive cover (see Primary hard drive on page 38). Remove the memory module: 1. Loosen the two captive Phillips screws (1) that secure the memory module compartment cover to the computer. 2. Pivot the front edge of the memory module compartment cover (2) upward. 3. Remove the memory module compartment cover. The memory module compartment cover is included in the Plastics Kit, spare part number 603795-001. NOTE: The top memory module slot contains the expansion memory module. The memory module slot contains the primary memory module. 4. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) 42 Chapter 4 Removal and replacement procedures