HP ENVY 17t-2000 HP ENVY 17 (model numbers 2000 through 2099) - Maintenance an - Page 73
services them, services
View all HP ENVY 17t-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
4. Remove the fan/heat sink assembly (3). NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system board each time the fan/heat sink assembly is removed: ● Thermal paste is used on the processor (1) and the heat sink section (2) that services it ● Thermal pads are used on the graphics subsystem chip (3) and the heat sink section (4) that services it ● Thermal pads are used on the system board capacitors (5) and the heat sink section (6) that services them Replacement thermal material is included with all fan/heat sink assembly, system board, and processor spare part kits. Reverse this procedure to install the fan/heat sink assembly. Component replacement procedures 65
4.
Remove the fan/heat sink assembly
(3)
.
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink
assembly and the system board each time the fan/heat sink assembly is removed:
●
Thermal paste is used on the processor
(1)
and the heat sink section
(2)
that services it
●
Thermal pads are used on the graphics subsystem chip
(3)
and the heat sink section
(4)
that
services it
●
Thermal pads are used on the system board capacitors
(5)
and the heat sink section
(6)
that
services them
Replacement thermal material is included with all fan/heat sink assembly, system board, and processor
spare part kits.
Reverse this procedure to install the fan/heat sink assembly.
Component replacement procedures
65