HP ENVY 17t-2000 HP ENVY 17 (model numbers 2000 through 2099) - Maintenance an - Page 81
Remove the Phillips PM2.0×4.0 screw, If it is necessary to replace the webcam/microphone module
View all HP ENVY 17t-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
f. Remove the display bezel/panel assembly (4). g. Set the display enclosure aside. The display enclosure is available using spare part numbers 603775-001 (for use only with computer models equipped with a 2D display assembly) and 621336-001 (for use only with computer models equipped with a 3D display assembly). 8. If it is necessary to replace the webcam/microphone module: a. Remove the Phillips PM2.0×4.0 screw (1) that secures the webcam/microphone module to the display bezel. b. Release the webcam/microphone module (2) as far as the webcam/microphone module allows. Component replacement procedures 73
f.
Remove the display bezel/panel assembly
(4)
.
g.
Set the display enclosure aside. The display enclosure is available using spare part numbers
603775-001 (for use only with computer models equipped with a 2D display assembly) and
621336-001 (for use only with computer models equipped with a 3D display assembly).
8.
If it is necessary to replace the webcam/microphone module:
a.
Remove the Phillips PM2.0×4.0 screw
(1)
that secures the webcam/microphone module to
the display bezel.
b.
Release the webcam/microphone module
(2)
as far as the webcam/microphone module
allows.
Component replacement procedures
73