HP ENVY 32 BIOS Simulator - Page 16
Sets the Num Lock state after POST., S4/S5 Wake on LAN
View all HP ENVY 32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Back to BIOS Utility Menus Configuration Menu Main Security Configuration Boot Options Exit Language Virtualization Technology SATA Emulation Num Lock State at Power-On S4/S5 Wake on LAN ► Thermal 1 2 3 4 5 Virtualizatiion Technology Disabled Enabled Item Specific Help 1. Select the display language for the BIOS. 2. Enable Virtualization Technology Support. A Power Cycle is required for a change to be activated. 3. When set to AHCI, SATA is configured to AHCI mode. When set to RAID, SATA is configured to RAID mode. 4. Sets the Num Lock state after POST. 5. Permits the user to control whether the system should wale from S4 or S5 if a magic packet is received by the NIC Back to Welcome Page
Configuration Menu
Configuration
Item Specific Help
1
2
4
3
5
Language
Virtualization Technology
SATA Emulation
Num Lock State at Power-On
S4/S5 Wake on LAN
Virtualizatiion Technology
1.
Select the display language for the
BIOS.
2.
Enable Virtualization Technology Sup-
port. A Power Cycle is required for a
change to be activated.
3. When set to AHCI, SATA is configured
to AHCI mode. When set to RAID, SATA
is configured to RAID mode.
4. Sets the Num Lock state after POST.
5. Permits the user to control whether
the system should wale from S4 or S5
if a magic packet is received by the NIC