HP ENVY 32 BIOS Simulator - Page 23

Back to BIOS Utility Menus Boot Options Menu Back to Welcome Page Main Security Configuration Boot Options Exit Post Hotkey Delay (sec) USB Boot Network Boot Network Boot Protocol Legacy Support Secure Boot Platform Key Pending Action Clear All Secure Boot Keys Load HP Factory Default Keys Load MSFT Debug Policy Keys 1 2 3 4 5 Enrolled MSFT None USB Boot UEFI Boot Order ► OS Boot Manager Internal CD/DVD ROM Drive USB Flash Drive/USB Hard Disk USB CD/DVD ROM Drive Disabled Enabled Legacy Boot Order ► Internal Hard Drive Internal CD/DVD ROM Drive USB Flash Drive/USB Hard Disk USB CD/DVD ROM Drive Item Specific Help 1. Enable/Disable USB boot. 2. Enable/Disable network boot during boot time. 3. Select Network Boot Protocol using IPv4, IPv6 or IPv4+IPv6. When IPv4+IPv6 is selected, BIOS will use IPv4 first. 4. When Legacy Support Is enabled. BIOS will load Compatibility Support Module to support Legacy OS such as Windows 7. Windows Vista. Windows XP und DOS. When legacy Support is disabled. BIOS will boot in UEFI Mode without CSM to support newer OS such as Windows 8. System might be unable to boot Into operating system after changing this setting. 5. Secure Boot flow control. Secure Boot is possible only if System runs in User Mode.