HP ENVY Spectre XT Ultrabook 13-2000 SpectreXT Maintenance and Service Guide - Page 49
Speakers, Remove the front speakers
View all HP ENVY Spectre XT Ultrabook 13-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
2. Remove the heat sink (2). Reverse this procedure to install the heat sink.. CAUTION: These screws must be installed in the sequence that is marked on the heat sink so that the correct pressure is applied to the processor and other components. Speakers Description Speaker Kit, front (includes front speaker and cable) Speaker Kit, rear (includes front speaker and cable) Spare part number 689951-001 689952-001 Before removing the front speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 27). 5. Disconnect the battery cable (see Battery on page 29). Remove the front speakers: 1. Turn the computer, with the front edge toward you. 2. Disconnect the front speaker cable (1) from the USB/audio board. Component replacement procedures 41