HP ENVY Spectre XT Ultrabook 13-2000 SpectreXT Maintenance and Service Guide - Page 51
USB/Audio board, Remove the USB/Audio board
View all HP ENVY Spectre XT Ultrabook 13-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
2. Remove the 2 Phillips PM 4.0 millimeter screws (2), and then remove the rear speakers (3). USB/Audio board Description USB/Audio board (includes digital media card reader) Spare part number 689947-001 Before removing the USB/Audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 51). 5. Remove the base enclosure (see Base enclosure on page 27). 6. Disconnect the battery cable (see Battery on page 29). Remove the USB/Audio board: 1. Disconnect the left front speaker cable (1). 2. Disconnect the right front speaker cable (2). 3. Disconnect the fan cable (3). 4. Disconnect the rear speaker cable (4). 5. Disconnect the 3 Phillips PM 4.5 millimeter screws securing the USB/Audio board (5). Component replacement procedures 43