HP ENVY TouchSmart m6-k015dx HP ENVY m6 Sleekbook HP ENVY Touchsmart m6 SleekB - Page 43
Solid state drive (Intel models only), Remove the Phillips PM2.0×2.0 screw
View all HP ENVY TouchSmart m6-k015dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Remove the hard drive bracket: 1. Remove the 4 PM2.0×3.0 screws (1) on the hard drive bracket. 2. Remove the hard drive brackets (2) from the hard drive. Reverse these procedures to reassemble and install the hard drive. Solid state drive (Intel models only) Description Solid state drive 24-GB Solid state drive 128-GB Spare part number 727598-001 727514-001 Before removing the SSD, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the service cover (see Service cover on page 30). 5. Remove the battery (see Battery on page 32). Remove the solid-state drive: 1. Remove the Phillips PM2.0×2.0 screw (1) that secures the solid-state drive to the computer. The drive tilts upwards. Component replacement procedures 35