HP ENVY TouchSmart m6-k015dx HP ENVY m6 Sleekbook HP ENVY Touchsmart m6 SleekB - Page 49
Left speaker/subwoofer, Remove the RJ-45 module cover see
View all HP ENVY TouchSmart m6-k015dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Left speaker/subwoofer Description Speaker Kit (includes left speaker/subwoofer and right speaker) Spare part number 725460-001 The computer includes two separate speakers - a speaker on the right side, and a speaker/subwoofer on the left side. You must remove the system board to remove the right speaker. You do not have to remove the system board to remove the left speaker/subwoofer. You do have to remove the RJ-45 module cover to remove the left speaker/subwoofer. Before removing the left speaker, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the service cover (see Service cover on page 30). 5. Remove the battery (see Battery on page 32). 6. Remove the RJ-45 module cover (see RJ-45 module cover on page 40). Remove the left speaker/subwoofer: 1. Remove the 2 Phillips PM2.5×5.5 screws that secure the left display hinge to the computer, and then rotate the hinge upward (2). 2. Disconnect the speaker cable from the USB/audio board (1). Component replacement procedures 41