HP ENVY Ultrabook 6-1100 HP Envy 6 Maintenance and Service Guide - Page 43
Shroud separator, available on the HP website., Remove the base enclosure
View all HP ENVY Ultrabook 6-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Remove the base enclosure: 1. Turn the computer face down, remove the 12 Phillips PM 7.5 millimeter long screws. 2. Remove the bottom enclosure. NOTE: To remove the bottom enclosure, use a thin, non-conductive tool such as the HP Tool Shroud separator, available on the HP website. Component replacement procedures 35
Remove the base enclosure:
1.
Turn the computer face down, remove the 12 Phillips PM 7.5 millimeter long screws.
2.
Remove the bottom enclosure.
NOTE:
To remove the bottom enclosure, use a thin, non-conductive tool such as the HP Tool
Shroud separator, available on the HP website.
Component replacement procedures
35