HP ENVY Ultrabook 6-1100 HP Envy 6 Maintenance and Service Guide - Page 55
Fan
View all HP ENVY Ultrabook 6-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
7. Remove the top cover (see Top cover on page 66). 8. Disconnect the battery cable (see Battery on page 36). Remove the memory module: 1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) CAUTION: To prevent damage to the memory module, hold it by the edges only. Do not touch the components on the memory module. 2. Slide the memory module forward (2). 3. Remove the memory module (3). Fan Reverse this procedure to install a memory module. Description Fan Spare part number 686580-001 Before removing the fan: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 32). 5. Remove the base enclosure (see Base enclosure on page 34). 6. Disconnect the battery cable (see Battery on page 36). Component replacement procedures 47