HP ENVY Ultrabook 6-1100 HP Envy 6 Maintenance and Service Guide - Page 75
Display panel cable assembly, Before removing the antenna cables
View all HP ENVY Ultrabook 6-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Before removing the antenna cables: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 32). 5. Remove the base enclosure (see Base enclosure on page 34). 6. Disconnect the battery cable (see Battery on page 36). Remove the WLAN antenna cables: ▲ Remove the WLAN antenna transceivers (1), and then remove the cables (2) from the right and left sides of the hinge. Display panel cable assembly Description Display panel cable assembly Spare part number 686592-001 Before removing the display panel cable assembly: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 32). Component replacement procedures 67