HP ENVY dv4-5b00 HP Envy dv4 Maintenance and Service Guide - Page 68
Remove the Phillips M2.5×6.5 screw, Remove the power connector cable
View all HP ENVY dv4-5b00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Remove the power connector cable: 1. Remove the Phillips M2.5×6.5 screw (1) and the two Phillips M2.0×5.0 screws (2) that secure the power connector bracket to the base enclosure. 2. Remove the power connector bracket (3). 3. Release the power connector (4) from the clip built into the base enclosure. 4. Remove the power connector cable. Reverse this procedure to install the power connector cable. 60 Chapter 4 Removal and replacement procedures
Remove the power connector cable:
1.
Remove the Phillips M2.5×6.5 screw
(1)
and the two Phillips M2.0×5.0 screws
(2)
that secure
the power connector bracket to the base enclosure.
2.
Remove the power connector bracket
(3)
.
3.
Release the power connector
(4)
from the clip built into the base enclosure.
4.
Remove the power connector cable.
Reverse this procedure to install the power connector cable.
60
Chapter 4
Removal and replacement procedures