HP ENVY dv7-7373ca HP ENVY dv7 Notebook PC Maintenance and Service Guide IMPOR - Page 60
RTC battery, from the cavity in the base enclosure.
View all HP ENVY dv7-7373ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
RTC battery Description RTC battery (includes cable and double-sided tape) Spare part number 682091-001 Before removing the RTC battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 47). 5. Remove the service cover (see Hard drive on page 48). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Release the RTC battery (2) from the cavity in the base enclosure. NOTE: The RTC battery is attached to the base enclosure with double-sided tape. Firm pressure may be required to release the RTC battery from the base enclosure. 3. Remove the RTC battery. Reverse this procedure to install the RTC battery. 52 Chapter 4 Removal and replacement procedures