HP ENVY dv7-7373ca HP ENVY dv7 Notebook PC Maintenance and Service Guide IMPOR - Page 88
Disconnect the power connector cable, that secure the system board
View all HP ENVY dv7-7373ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
8. Detach the display panel cable (5) from the heat sink. (The display panel cable is attached to the heat sink with double-sided tape.) 9. Disconnect the USB board cable (1) from the system board. 10. Disconnect the power connector cable (2) from the system board. 11. Remove the four Phillips PM2.5×6.0 screws (1) that secure the system board to the base enclosure. 80 Chapter 4 Removal and replacement procedures
8.
Detach the display panel cable
(5)
from the heat sink. (The display panel cable is attached to
the heat sink with double-sided tape.)
9.
Disconnect the USB board cable
(1)
from the system board.
10.
Disconnect the power connector cable
(2)
from the system board.
11.
Remove the four Phillips PM2.5×6.0 screws
(1)
that secure the system board to
the base enclosure.
80
Chapter 4
Removal and replacement procedures