HP ENVY dv7-7373ca HP ENVY dv7 Notebook PC Maintenance and Service Guide IMPOR - Page 68
Remove the two Phillips PM2.5×8.5 screws that secure the keyboard to the computer.
View all HP ENVY dv7-7373ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Before removing the keyboard, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 47). 5. Remove the service cover (see Hard drive on page 48). Remove the keyboard: 1. Remove the two Phillips PM2.5×8.5 screws that secure the keyboard to the computer. 2. Rest the computer on its left side. 3. Open the computer. 60 Chapter 4 Removal and replacement procedures
Before removing the keyboard, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
47
).
5.
Remove the service cover (see
Hard drive
on page
48
).
Remove the keyboard:
1.
Remove the two Phillips PM2.5×8.5 screws that secure the keyboard to the computer.
2.
Rest the computer on its left side.
3.
Open the computer.
60
Chapter 4
Removal and replacement procedures