HP EVA P6000 HP Controller Enclosure Midplane Replacement Instructions (593095 - Page 1
HP EVA P6000 Manual
View all HP EVA P6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP Controller Enclosure Midplane Replacement Instructions © Copyright 2009 Hewlett-Packard Development Company, L.P. Second edition: May 2011 The information in this document is subject to change without notice. Printed in Puerto Rico www.hp.com About this document For the latest documentation, go to http://www.hp.com/support/ manuals, and select your product. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. WARRANTY STATEMENT: To obtain a copy of the warranty for this product, see the warranty information website: http://www.hp.com/go/storagewarranty Before you begin Observe the following precaution when replacing the controller midplane. CAUTION: Parts can be damaged by electrostatic discharge. Use proper anti-static protection. Refer to the documentation that shipped with your system for additional information. Your controller enclosure model may vary slightly from what is illustrated in this document. Verifying component failure There are few active parts on the midplane board that can fail. If you receive error messages, or see erroneous LED indications on the following components that you know are good, then you might suspect a problem with the midplane board: • Battery module • Fan module • Array controller • Management module • Power supply module • Riser assembly • LED display • Power UID *593095-001* Page 1