HP EVA P6550 HP P6300/P6500 EVA Installation Guide (5697-2485, September 2013) - Page 22
Attach the brackets for a longer chassis, Typical rack configurations
![]() |
View all HP EVA P6550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
NOTE: The power distribution units can be assembled either vertically (using the PDU hinge) as shown for configuring for expansion, or horizontally as shown for configuring for maximum rack space. Figure 6 Typical rack configurations P63x0 configured for maximum rack space P65x0 configured for expansion Attach the brackets for a longer chassis If you are installing a longer chassis into your cabinet, such as for the controller enclosure, you must remove the shipping retaining bracket and install the smaller brackets supplied in the accessory kit. NOTE: A No. 2 Phillips head screwdriver is required for this procedure. 1. Remove the existing screw and shipping retaining bracket from the rear of the rail. 2. Insert a screw through the bottom hole of the new bracket and loosely secure the bracket to the rear of the rail. 22 Installing components
![](/manual_guide/products/hewlettpackard-eva-p6550-hp-p6300p6500-eva-installation-guide-56972485-2013-df9bf79/22.png)