HP EVA P6550 HP P6300/P6500 EVA Installation Guide (5697-2485, September 2013) - Page 59
Accessing the HP P6000 Control Panel through HP P6000 Command View, Step 4
View all HP EVA P6550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Figure 49 Configure controller host ports window 5. In the Topology box, select Direct from the drop-down menu. 6. Click Save Changes. 7. Repeat Step 4 through Step 6 for other ports where direct connect is desired. 8. Close the HP P6000 Control Panel and remove the Ethernet cable from the server, however, you may want to retain access to the ABM to initialize the storage cell, for example. Accessing the HP P6000 Control Panel through HP P6000 Command View 1. Select the storage system you want to access. 2. Select Hardware > Controller Enclosure > Management Module. 3. Click Launch HP P6000 Control Panel. On rare occasions, the Launch HP P6000 Control Panel button may not appear due to invalid array state or if the management module IP address is unknown to HP P6000 Command View. Accessing the HP P6000 Control Panel through HP P6000 Command View 59