HP EliteDesk 800 35W G3 Hardware Reference Guide - Page 30
Insert the new solid-state drive into the socket on the system board and press the solid-state drive
![]() |
View all HP EliteDesk 800 35W G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
11. Locate the solid-state drive on the system board. 12. Remove the screw securing the solid-state drive to the system board (1). 13. Grasp the solid-state drive by the sides and carefully pull it out of the socket (2). 14. Remove the screw holder from the solid-state drive (3) for use on the replacement solid-state drive. 15. Insert the screw holder into the niche on the end of the new solid-state drive (1). 16. Insert the new solid-state drive into the socket on the system board and press the solid-state drive connectors (2) firmly into the socket. NOTE: A solid-state drive can be installed in only one way. 24 Chapter 3 Hardware upgrades
![](/manual_guide/products/hewlettpackard-elitedesk-800-35w-g3-hardware-reference-guide-2344306/30.png)
11.
Locate the solid-state drive on the system board.
12.
Remove the screw securing the solid-state drive to the system board (1).
13.
Grasp the solid-state drive by the sides and carefully pull it out of the socket (2).
14.
Remove the screw holder from the solid-state drive (3) for use on the replacement solid-state drive.
15.
Insert the screw holder into the niche on the end of the new solid-state drive (1).
16.
Insert the new solid-state drive into the socket on the system board and press the solid-state drive
connectors (2) firmly into the socket.
NOTE:
A solid-state drive can be installed in only one way.
24
Chapter 3
Hardware upgrades