HP EliteDesk 800 35W G3 Hardware Reference Guide - Page 37
Reconnect external devices, plug in the power cord, and then turn on the computer.
![]() |
View all HP EliteDesk 800 35W G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
c. Connect the fan plug to the system board (3). 22. Align the hard drive guide screws with the slots on the hard drive cage, press the hard drive down into the cage, then slide it forward (1) until it stops and locks in place. 23. Rotate the hard drive latch down (2) to engage the hard drive. 24. Replace the access panel. For instructions, see Replacing the computer access panel on page 14. 25. If the computer was on a stand, replace the stand. 26. Reconnect external devices, plug in the power cord, and then turn on the computer. 27. Lock any security devices that were disengaged when the access panel was removed. Replacing the WLAN module 31
![](/manual_guide/products/hewlettpackard-elitedesk-800-35w-g3-hardware-reference-guide-2344306/37.png)
c.
Connect the fan plug to the system board (3).
22.
Align the hard drive guide screws with the slots on the hard drive cage, press the hard drive down into
the cage, then slide it forward (1) until it stops and locks in place.
23.
Rotate the hard drive latch down (2) to engage the hard drive.
24.
Replace the access panel.
For instructions, see
Replacing the computer access panel
on page
14
.
25.
If the computer was on a stand, replace the stand.
26.
Reconnect external devices, plug in the power cord, and then turn on the computer.
27.
Lock any security devices that were disengaged when the access panel was removed.
Replacing the WLAN module
31