HP Envy 17-1006tx HP ENVY 17 - Maintenance and Service Guide - Page 67

Power connector cable, built into the base enclosure.

Get HP Envy 17-1006tx PDF manuals and user guides View all HP Envy 17-1006tx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Power connector cable Description Power connector cable Spare part number 617348-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37), and then remove the following components: a. memory module compartment cover (see Memory module on page 42) b. Keyboard (see Keyboard on page 50) c. Top cover (see Top cover on page 52) Remove the power connector cable: 1. Disconnect the power cable (1) from the system board. 2. Release the power cable from the clips (2) built into the base enclosure. 3. Remove the Phillips PM2.5×5.0 screw (3) that secures the power connector to the base enclosure. 4. Release the power connector (4) from the clip built into the base enclosure. 5. Remove the power connector cable. Reverse this procedure to install the power connector cable. ENWW Component replacement procedures 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
Power connector cable
Description
Spare part number
Power connector cable
617348-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
37
), and then remove the following components:
a.
memory module compartment cover (see
Memory module
on page
42
)
b.
Keyboard (see
Keyboard
on page
50
)
c.
Top cover (see
Top cover
on page
52
)
Remove the power connector cable:
1.
Disconnect the power cable
(1)
from the system board.
2.
Release the power cable from the clips
(2)
built into the base enclosure.
3.
Remove the Phillips PM2.5×5.0 screw
(3)
that secures the power connector to the base enclosure.
4.
Release the power connector
(4)
from the clip built into the base enclosure.
5.
Remove the power connector cable.
Reverse this procedure to install the power connector cable.
ENWW
Component replacement procedures
59