HP Evo n1000v Maintenance and Service Guide - Page 132
Removing the Heat Spreader Screws, One TM2.5 × 5.0 screw
View all HP Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Removal and Replacement Procedures 4. Disconnect the fan cable 1 from the system board (Figure 5-20). 5. Remove the following screws: ❏ One TM2.5 × 5.0 screw 2 next to the fan ❏ One TM2.5 × 5.0 screw 3 that secures the display video cable ground loop ❏ Four spring-loaded TM2.5 × 14.0 shoulder screws 4 ✎ The four spring-loaded shoulder screws should be removed and installed in the "1," "2," "3," "4" sequence stamped on the heat spreader adjacent to each screwhole. ❏ One TM2.5 × 8.0 screw 5 next to the keyboard and TouchPad ZIF connectors Figure 5-20. Removing the Heat Spreader Screws 5-26 Maintenance and Service Guide
5–26
Maintenance and Service Guide
Removal and Replacement Procedures
4. Disconnect the fan cable
1
from the system board
(Figure 5-20).
5. Remove the following screws:
❏
One TM2.5 × 5.0 screw
2
next to the fan
❏
One TM2.5 × 5.0 screw
3
that secures the display video
cable ground loop
❏
Four spring-loaded TM2.5 × 14.0 shoulder screws
4
✎
The four spring-loaded shoulder screws should be removed and
installed in the “1,” “2,” “3,” “4” sequence stamped on the heat
spreader adjacent to each screwhole.
❏
One TM2.5 × 8.0 screw
5
next to the keyboard and
TouchPad ZIF connectors
Figure 5-20. Removing the Heat Spreader Screws