HP F4240 User Guide - Page 114
Printouts seem blurry or fuzzy, Solution 1: Check the print settings
UPC - 883585581290
View all HP F4240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Troubleshooting Cause: The print cartridges needed to be cleaned or there was insufficient ink. Printouts seem blurry or fuzzy Try the following solutions if your printout is smudged or unclear. NOTE: There is no problem with the ink supplies and replacing the print cartridges is unnecessary. TIP: After reviewing the solutions in this section, you can go to HP's support Web site to see if there is additional troubleshooting help. For more information, go to: www.hp.com/support. • Solution 1: Check the print settings • Solution 2: Check the resolution of the image Solution 1: Check the print settings Solution: Check the print settings. • Check the paper type setting to make sure it matches the type of paper loaded in the input tray. • Check the quality setting. Use a higher quality setting to increase the amount of ink used for printing. For more information, see: • Set the paper type for printing • Change the print speed or quality • Print using Maximum dpi • Make a Fast copy Cause: The paper type or print quality settings were incorrectly. If this did not solve the issue, try the next solution. Solution 2: Check the resolution of the image Solution: Check the resolution of the image. If you are printing a photo or graphic, and the resolution is too low, it will be blurry or fuzzy when printed. If a digital photo or rasterized graphic has been resized, it can be blurry or fuzzy when printed. Cause: The resolution of the image was low. Printouts have vertical streaks Refer to this section if your printout has a lines, streaks, or marks on it that run upand-down or lengthwise down the page. NOTE: There is no problem with the ink supplies and replacing the print cartridges is unnecessary. Print quality troubleshooting 111