HP F4240 User Guide - Page 130
Copy troubleshooting, Nothing happens when I try to copy
UPC - 883585581290
View all HP F4240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Troubleshooting Copy troubleshooting Use this section to solve these copy problems: • Nothing happens when I try to copy • Parts of the original do not appear or are cut off • The printout appears enlarged on the page • The printout is blank • A borderless copy has white space around the edges Nothing happens when I try to copy Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. • Solution 1: Make sure that the product is turned on • Solution 2: Make sure that the original is placed correctly on the glass • Solution 3: Wait for the product to finish other tasks • Solution 4: Make sure the paper loaded is recognized by the product • Solution 5: Check for a paper jam Solution 1: Make sure that the product is turned on Solution: Look at the On button located on the product. If it is not lit, the product is turned off. Make sure the power cord is firmly connected to the product and plugged into a power outlet. Press the On button to turn on the product. Cause: The product was turned off. If this did not solve the issue, try the next solution. Solution 2: Make sure that the original is placed correctly on the glass Solution: Load your original print side down on the right front corner of the glass. Cause: The original was placed incorrectly on the glass. Copy troubleshooting 127