HP Fortis 11 inch G10 Chromebook Enterprise Maintenance and Service Guide Fort - Page 50
Remove the Phillips M2.0 × 3.0 screw, then remove the bracket
View all HP Fortis 11 inch G10 Chromebook Enterprise manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
1. Remove the four Phillips M2.5 × 3.5 screws that secure the display assembly to the computer. 2. Lift the tape (1) that covers the display connector on the system board. You do not have to completely remove the tape. 3. Disconnect the display cable (2) from the ZIF connector on the system board. 4. Remove the Phillips M2.0 × 3.0 screw (3) that secures from the bracket on the WWAN module, and then remove the bracket (4). 5. Disconnect the antenna cables (5) from the WWAN module. Display assembly 45
1.
Remove the four Phillips M2.5 × 3.5 screws that secure the display assembly to the computer.
2.
Lift the tape
(1)
that covers the display connector on the system board. You do not have to
completely remove the tape.
3.
Disconnect the display cable
(2)
from the ZIF connector on the system board.
4.
Remove the Phillips M2.0 × 3.0 screw
(3)
that secures from the bracket on the WWAN module, and
then remove the bracket
(4)
.
5.
Disconnect the antenna cables
(5)
from the WWAN module.
Display assembly
45