HP G6000XX Compaq Presario F500 and G6000 Notebook PC - Maintenance and Servic - Page 67
each time the fan/heat sink assembly is removed. Thermal pads and thermal paste should be applied
View all HP G6000XX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
4. Remove the fan/heat sink assembly (3). NOTE: Due to the adhesive quality of the thermal paste and thermal pads located between the fan/heat sink assembly and system board components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly. NOTE: The thermal paste and thermal pads should be thoroughly cleaned from the surfaces of the fan/ heat sink assembly (1), (2), and (3), the system board components (4) and (6), and the processor (5) each time the fan/heat sink assembly is removed. Thermal pads and thermal paste should be applied to all surfaces before the fan/heat sink assembly is reinstalled. Thermal pads and thermal paste are included with all fan/heat sink assembly, system board, and processor spare part kits. Reverse this procedure to install the fan/heat sink assembly. Component replacement procedures 59